Waxes
Briwax Toluene Free
Briwax Toluene free has been blended with slightly milder solvents, so that it gives off less odour whilst drying, whilst at the same time providing a smooth application and finish. The film remains as a paste for slightly longer than Briwax Original to aid the even application and will leave you with the deep grain enriching BRIWAX shine. Unsealed wooden surfaces should be smooth, dry and clean.
Apply Briwax using a lint free cloth or 0000 Steel Wool, thoroughly working the wax into the grain. Once dry, buff to desired finish with a clean soft cloth. Improved shine and durability can be achieved by first sealing the surface with Briwax Sanding Sealer.
For antiques and pre-finished furniture, first check compatibility, then apply Briwax in small areas with a clean soft cloth. The Briwax finish can be maintained by further applications which will give increased hardness and shine.
This product is not recommended for use in areas where it will come into contact with water. Above 20°C, Briwax will soften and liquify. Replace lid, put in a cool place and it will return to its original state.
Please contact our Technical Team for further Safety Data information
- Easy to apply and buff.
- Gives a long lasting Satin sheen.
- Rapid dry.
- Can be applied directly to timber or onto Briwax Shellac Sanding Sealer.
- Suitable for use on most wooden surfaces.